西门子CPU417

西门子CPU417可编程控制器      西门子CPU417可编程控制器

	
6ES7417-4XT05-0AB0
SIMATIC S7-400，CPU 417-4DP： 30MB（15MB代码，15MB数据），位处理速度18ns，集成接口：1. MPI/DP, 2. PROFIBUS DP, 3~4.可扩展的IF964-DP(IF1)接口

 SIEMENS 可编程控制器
　　1、 SIMATIC S7 系列PLC、S7200、s71200、S7300、S7400、S71200，S7,1500，ET200
　　2、 逻辑控制模块 LOGO！230RC、230RCO、230RCL、24RC、24RCL等
　　3、 SITOP 系列直流电源 24V DC 1.3A、2.5A、3A、5A、10A、20A、40A
4、HMI  触摸屏TD200 TD400C TP177,MP277 MP377
  SIEMENS 交、直流传动装置
　　1、 交流变频器 MICROMASTER系列：MM、MM420、MM430、MM440、ECO
　　　　　　　　　MIDASTER系列：MDV
　　　　　　　　　6SE70系列（FC、VC、SC）
　　2、全数字直流调速装置 6RA23、6RA24、6RA28、6RA70 系列
SIEMENS 数控 伺服
1、840D、802S/C、802SL、828D 801D ：6FC5210,6FC6247,6FC5357,6FC5211,6FC5200,6FC5510,
2、伺服驱动 ：  6SN1123,6SN1145,6SN1146,6SN1118,6SN1110,6SN1124,6SN1125,6SN1128


功能强大的 SIMATIC S7-400 CPU
可用在高性能范围中较复杂的装置
有 2 个 IF 模块插槽

Area of application

The CPU 417-4 is the most powerful SIMATIC S7-400 CPU. The integral PROFIBUS DP interfaces permit direct connection to the PROFIBUS DP fieldbus as master or slave.

Two further DP master systems can be connected via the IF 964-DP interface submodules.

Note :
Only the interface module 6ES7 964-2AA04-0AB0 can be used.


Design

The CPU 417-4 has:

Powerful processor: 
The CPU achieves instruction execution times as low as 0.018 μs per binary instruction.
30 MB RAM (of which 15 MB each for program and data); 
fast RAM for parts of the user program relevant to execution.
Flexible expansion: 
Up to 262144 digital and 16384 analog inputs/outputs.
Multi-point interface MPI: 
With the MPI it is possible to establish simple networking of max. 32 stations at a data transmission rate of up to 12 Mbit/s. The CPU can establish up to 44 connections to stations of the communications bus (C bus) and the MPI.
Note:
If the PROFIBUS DP interface and MPI interface are operated simultaneously, it is only possible to connect the following bus connector to the MPI interface:
With socket: 6ES7 972-0BB41-0XA0
Without socket: 6ES7 972-0BA41-0XA0
Mode selector switch: 
Designed as toggle switch.
Diagnostics buffer: 
The last 120 fault and interrupt events are retained in a ring buffer for diagnostic purposes (extendable).
Real-time clock: 
The date and time are appended to diagnostic messages of the CPU.
Memory card: 
For expansion of the integrated load memory. The information in the load memory comprises S7-400 parameterization data in addition to the program and therefore requires twice as much memory space. The result is:
The integral load memory is not sufficient for large programs, therefore a memory card is frequently required. 
RAM and FEPROM cards (FEPROM for retentive storage) are available
PROFIBUS DP interface: 
The PROFIBUS DP master interface allows a distributed automation configuration offering high speed and ease of use. From the user's point of view, the distributed I/O is treated as central I/O (same configuring, addressing, and programming). 
Mixed configuration: SIMATIC S5 with SIMATIC S7 as PROFIBUS master to EN 50170. 
Note:
If the PROFIBUS DP and MPI interface are operated simultaneously, it is only possible to connect the following bus connectors to the MPI interface:
With socket: 6ES7 972-0BB41-0XA0
Without socket: 6ES7 972-0BA41-0XA0
Two additional slots: 
Two additional PROFIBUS DP master systems can be connected via IF 964-DP interface modules.

Functions

Block protection: 
a password concept also protects the user program from unauthorized access
Integrated HMI services: 
The user only has to specify the source and destination of the data with HMI devices. The data are then transported cyclically and automatically by the system.
Integrated communication functions:
PG/OP communication
Global data communication
S7 standard communication
S7 communication
Configurable Attributes
The STEP 7 tool "Hardware configuration" can be used to program the properties and response of the S7-400 including the CPUs, e.g.

Multipoint interface MPI:
Definition of node addresses
Startup/cycle behavior
Stipulation of the maximum cycle time and communication load
Address allocation: 
Addressing of I/O modules
Retentive area: 
Definition of the number of retentive bit memories, counters, timers, data blocks, and clock memories
Size of the process image, local data
Length of the diagnostics buffer
Protection level: 
Definition of access authorizations to program and data
System diagnostics: 
Definition of the handling and scope of diagnostics messages
Timed interrupts: 
Setting of periods
Configuring
Reporting functions
Status and fault indicators: 
LEDs indicate internal and external faults and operating modes such RUN, STOP, restart, test function, etc.
Test functions: 
The PG can be used to display ** states in program execution, modify process tags irrespective of the user program, read out the contents of stack memories, run separate program steps and inhibit program components.
Information functions: 
The PG can be used to provide the user with information about the memory capacity and operating mode of the CPU, and the current utilization of the working and load memories.

Technical Specifications (MyMMP/TED)

 

6ES7 417-4XT05-0AB0
 

CPU 417-4

一般信息

 

硬件产品型号

04

固件型号

V5.3

工程组态

 

编程软件包
STEP 7 V5.3 SP2 或更高，带硬件更新

CiR - 在 RUN 模式下组态

 

CiR 同步时间，基本负载

60 ms

CiR 同步时间,每个 I/O 从站的时间

7 μs

电源电压

 

24 V DC

×；电源通过系统电源提供

输入电流

 

从背板总线 5 V DC，较大

1.8 A

从接口 5 V DC，较大

90 mA；在每个 DP 接口处

功耗

 

功耗，典型值

7.5 W

功耗，较大

8 W

存储器

 

存储器类型

RAM

工作存储器

 

集成
30 Mbyte

集成（用于程序）
15 Mbyte

集成（用于数据）
15 Mbyte

可扩展
X

装载存储器

 

可扩展 FEPROM
√；带存储卡(FLASH)

可扩展的 FEPROM,较大
64 Mbyte

内置 RAM，较大
1 兆

可扩展 RAM
√；带存储器卡 (RAM)

可扩展的 RAM，较大
64 Mbyte

后备

 

提供
√

带电池
√；所有数据

无电池
X

CPU 处理时间

 

位操作，典型

18 ns

字操作，典型

18 ns

**数运算，典型

18 ns

浮点数运算，典型

54 ns

CPU 块

 

DB

 

数量，较大
16,000；编号范围：1 到 16000

容量，较大
64 KB

FB

 

数量，较大
8,000；编号范围：0 到 7999

容量，较大
64 KB

FC

 

数量，较大
8,000；编号范围：0 到 7999

容量，较大
64 KB

OB

 

容量，较大
64 KB

嵌套深度

 

每个**级
24

在一个错误 OB 中附加
2